Comment by kaibee
14 days ago
This is exactly the problem. The military needs single-use drones in high volume, and the production capacity/scale for that can only exist if it's subsidized by the consumer industry.
> You cannot compete with China even if we annexed Mexico for cheap labor in order to manufacture high volume low profit drones.
DJI isn't making drones by hand, they have automated factories. But its only worth building an automated factory if you're selling at a massive scale. Banning DJI drones in the US lets you build a factory in the US that can eventually get costs down.
And it's also dumb to fund your opponent's war production lines.
> Banning DJI drones in the US lets you build a factory in the US that can eventually get costs down.
1. It is a bad idea to use national defense in this manner. There are more honest tools that can be used, see two.
2. Using tariff or other trade tools can blunt the impact of DJI's market position and allow for US entrants to develop. [0]
A weakness of both nat-sec bans and tariffs is that they don't actually do anything to encourage a company like Anduril to make the pro/sumer stuff needed for volume sales to develop broad acceptance, fast iteration and well founded supply chains.
0. https://news.harvard.edu/gazette/story/2024/03/larger-lesson...
> Banning DJI drones in the US lets you build a factory in the US that can eventually get costs down.
I anticipate exactly zero automated drone factories.
"automated factory" is somewhat redundant, no?
The point is that most people who will buy a $700 Chinese drone will buy a $1000 US drone if that's all they can get.
I am of the opinion that the US made a very serious mistake by opening up tariff-free trade with countries which do not have comparable labor and environmental safety laws. The Feds should have come up with reasonable estimates of what foreign manufacturing was saving by cheating that way, and charged them that amount of money to sell products in the US. Factories which wanted to avoid those tariffs could pay for, and submit to, an independent audit of their factories.
Instead we decided that it was fine for US manufacturing to compete on an "even" basis with nations who are fine with laborers losing fingers and/or getting paid slave wages, and manufacturers dumping their waste stream into a nearby river. We've paid a severe price for that misguided egalitarianism, and it's time to change course.
> US made a very serious mistake by
Was it a mistake if the goal was to get cheaper products at the expense of foreigners losing fingers?
I agree it is myopic policy for the long term, but certainly many voters are happy to push safety problems somewhere else.
3 replies →
>The point is that most people who will buy a $700 Chinese drone will buy a $1000 US drone if that's all they can get.
In the consumer market, if the $1000 drone has a significantly worse user experience then people just won't buy it. Before DJI the consumer drone market was much smaller; by creating a cheap, high-quality product DJI caused more people to purchase drones, growing the market. If there's no competitive alternative the market will just shrink again; consumer drones aren't a necessity.
3 replies →
> The point is that most people who will buy a $700 Chinese drone will buy a $1000 US drone if that's all they can get.
the time when the US could actually decide this sort of thing at close to planet scale is long gone. if you ban those devices, there will be countless other nations (including close friends of the US) where you will be able to buy them no problem.
I don't see why. Drones are pretty simple manufacturing wise. The issue at scale is the supply chain of cheap motors, cheap control boards, and cheap batteries.
Sure, but you won't be allowed to buy one for less than the cost of a small car.
1 reply →
High volume single-use drones and DJI drones are almost completely orthogonal in terms of technology, production, and procurement. The only thing they really share is MEMS gyroscopes and brushless motor windings. Making a million FPV bomb drones and making a million consumer camera drones are such dramatically different tasks that there is not a chance this theory holds water.
You should look at see what kind of drones are dominating Ukraine's skies. You'd see some water being held. And you probably should have googled this before making this comment.
I'm quite familiar with this space, thanks :)
DJI drones are being used in significantly lower quantities as "base stations" and long-range reconnaissance applications, with the occasional bomb-dropping side run.
FPV drones are being used in much, much, much higher quantity than DJI drones, owing to their massively lower cost to produce due to ... the simpler and mostly orthogonal supply chain!
Financing a consumer/enterprise camera drone production capability with an end goal of enabling the construction of large quantities of one-way FPV drones, as the parent post to mine suggested, would not be a good strategy, IMO.
Having domestic consumer/enterprise camera drone production capability at all is of course a good idea, but the quantity needed in war fighting is significantly lower, at least with the current tools and techniques seen in Ukraine.
Most of the kamikaze drone videos I see use Betaflight OSD. DJI is kinda expensive for suicide missions.
>This is exactly the problem. The military needs single-use drones in high volume, and the production capacity/scale for that can only exist if it's subsidized by the consumer industry.
Single use drones could exist without subsidizing by the consumer industry. Ukraine is literally doing it with rubberbands. Anything else would simply lead to overdesign and basically the same problem we have now where the enemy is simply lobbing cheap artillery in volume while we simply do not have smart missiles to spare for Ukraine, nor for ourselves if we got into such a war. Lmao.
The American MIC is largely...maliciously incompetent. I work in this sector. Overdesigning, so you can slap a 500% profit margin on something with more features than ever needed. Then you lobby the generals in charge of project funding with dinners, gifts and more.
> Ukraine is literally doing it with rubberbands.
I'm under the impression that the supply-chain for Ukrainian drones basically leads to China in the same way that it does for Russia. For a "small" regional conflict, this isn't a problem to Ukraine because there's no way China could or would restrict supply of their cheap drones. But for a large-scale conflict, it would be a problem for the US to not be able to source drone motors by the 10,000's.
> The military needs single-use drones in high volume, and the production capacity/scale
But yet they have no trouble procuring single-use (by definition) artillery shells that cost an order of magnitude more and require even more production volume?
Except - they have. All Artillery Shell Plants in all NATO countries combined (minus Hungary, because f* Orban) are unable to produce enough shells just for the War in Ukraine. The US has completely gutted their manufacturing base, and currently won't be able to compete in a peer conflict on a ling term basis. Not enough shell and ammo production, not enough logistical capability, not enough ships, not enough dock capacity...
Single-use means $20K - $50K, not $2K. What militaries are competing against with the Houthis and in Ukraine, is 20 - 50K drones and right now taking them down with $2MM missiles or a 50K drone taking out a 2MM tank. Dial those numbers up and you can see how the imbalance in cost is unsustainable. They don't need drones to be 2K.
I think the military perspective at this point is that they want drones at all price points. Those 20-50k drones, I assume you mean like https://en.wikipedia.org/wiki/ZALA_Lancet and https://en.wikipedia.org/wiki/HESA_Shahed_136?
The cost estimates for those are quite wide, but in terms of raw materials even those low-cost prices are kind of absurd right? $20,000 for a few motors, batteries, basically a modern smartphone and 20-40 pounds of explosive? The military expects that they will get a lot cheaper, which means you need to be able to counter them at least as cheaply.
I don't understand why every estimate assumes Russian and Iranian engineers work for free and only include the raw material/components cost of these weapons systems.
R&D costs makes up the vast majority of the cost of Western weapons systems.
1 reply →
> I think the military perspective at this point is that they want drones at all price points.
I think you're 100% right here.
It may seem absurd, but something that can take out a main battle tank would be well worth $20,000. An M1A2 Abrams costs $24 million. The latest model Russian T-90 is around $4 million. A Chinese Type 99 is around $2.5 million. The asymmetry is clear.
Some of that $20,000 is making sure it works reliably under any conceivable weather conditions, after it's been stuck in a storage container at +50 C/-30C for weeks or months, etc.
On the other hand, if you're just doing reconnaissance, maybe you'd rather send a swarm of 20 $1,000 drones instead (in an attempt to overwhelm the enemy's countermeasures).
UA is showing the world what can be done with <$1k drones. China has that market locked down right now, presumably this legislation is aiming at that market. This isn't about Reaper-scale drones.